DaniSense DS系列電流傳感器基于磁通門零磁通檢測器，具有閉環操作，可提供由補償繞組中的匝數精確定義的信號輸出電流。它們為功率分析器的測量提供了更高的精度，并提高了功率放大器的性能。

Features 特征

Very high absolute amplitude and phase accuracy from dc to over 1kHz

從直流到超過 1kHz 的絕對幅度和相位精度非常高

Low signal output noise

低信號輸出噪聲

Low fluxgate switching noise on the pimary

磁通門開關噪聲低

Enhanced electrostatic shielding to increase rejection of primary dV/dt coupling

增強的靜電屏蔽，可提高初級 dV/dt 耦合的抑制率

Increased operating temperature range

增加工作溫度范圍

Reduced mechanical dimensions

減小機械尺寸

Full-scale current ranges to 2000Arms/±3000A peak in a self-contained head

滿量程電流范圍為 2000Arms/±3000A 峰值，采用獨立磁頭

Full-scale current range to 5000 Arms/±8000A peak with DS5000 head and electronics. DR10000 Models to 10kA

滿量程電流范圍達 5000 Arms/±8000A 峰值，帶 DS5000 磁頭和電子元件。DR10000型號至 10kA

Options: Voltage Output Signal; Calibration Winding

選項：電壓輸出信號;校準繞組

Amplitude and Phase measurement to 300kHz included with each head

每個磁頭都包含高達 300kHz 的幅度和相位測量

DaniSense Current Transducer Heads, DSSIU, Cables and Accessories are compatible with LEM IT Ultrastab Current Transducers.

DaniSense 電流傳感器頭、DSSIU、電纜和附件與 LEM IT Ultrastab 電流傳感器兼容。